Manitowoc Grove RT9150E User Manual

3-63
RT9150E OPERATOR MANUAL OPERATING CONTROLS AND PROCEDURES
3
Published 2-23-2017, Control # 644-00
Grove
Warning Submenu
Refer to the following table for a description of each item
listed above.
FIGURE 3-63
1
10
11
13
2
4
6
9
12
8
3
5
7
14
15
16
Item Description
1 Fuel level
2 Low steering pressure (CE option)
3 Voltage monitoring
4 Transmission oil temperature
5 Hoist fifth wrap indicator
6 Low brake pressure
7
Ambient air temperature, -29°C (Cold Weather
Option)
8 Engine warning
9 Pre-tension the counterweight
10 Replace the hydraulic oil filter
11 Anemometer not connected
12 Engine stop
13 Hydraulic oil temperature
14 Exhaust System Cleaning Required (T4i Engine)
15 Inhibit Exhaust System Cleaning
16 High Exhaust System Temperature (HEST)
Item Description Graphic Explanation
1 Fuel level
The fuel tank is only filled up to a level
of approximately 5%.
Refuel before the fuel is used up.
When the fuel tank is almost empty, air
is sucked in and you must bleed the
fuel system, refer to the Service
Manual.
2
Low steering
pressure
(CE option)
Inspect the steering system for leaks
and check the accumulator charge.
Refer to the Service Manual.
3
Voltage
monitoring
The voltage in the electrical system is
too high or too low.
Display of the current voltage, refer to
Monitoring submenu, page 3-47.
4
Transmission oil
temperature
The temperature of the transmission oil
is outside the operational range.
Reference Only

Manitowoc Grove RT9150E Specifications

General

Brand	Manitowoc
Model	Grove RT9150E
Category	Construction Equipment
Language	English