Manitowoc Grove RT9150E User Manual

3-67
RT9150E OPERATOR MANUAL OPERATING CONTROLS AND PROCEDURES
3
Published 2-23-2017, Control # 644-00
Grove
Item Description Graphic Explanation
1
Display of current
error/total errors
Item (2) shows the error total, and item
(1) shows which error is currently
displayed.
For example, 3/5, means:
• that error 3 is shown
• and there is a total of 5 errors.
If the error shown is not acknowledged,
the lamp next to the Enter button (3)
lights up.
To acknowledge the error, press the
Enter button (3) once.
If there are further errors, the next error
is displayed and can be acknowledged.
2 Next error
When all errors have been
acknowledged, you can retrieve any
pending errors using the buttons next
to the symbols (1) and (2).
(1) Next error, F5
(2) Previous error, F6
Every time you press a button, the next
error will be displayed.
When you keep a button pressed, all
errors are shown one after the other
continuously.
If all errors have not been
acknowledged, the ______buttons
have no function, the symbols are grey.
3 Previous error
4 Error display
Each error is defined by an error code
(5) and the symbols (1) to (4).
The symbols stand for:
(1) The faulty device
(2) The error group
(3) The index within the group
(4) The type of error
The error code (5) consists of 4 digits,
e.g. 2332.
Always note down the error code
before contacting Crane Care.
Reference Only

Manitowoc Grove RT9150E Specifications

General

Brand	Manitowoc
Model	Grove RT9150E
Category	Construction Equipment
Language	English