Masimo Root User Manual

www.masimo.com 103 Masimo
Chapter 6: Admit and Discharge to
Patient SafetyNet
The Admit/Discharge icon is located at the bottom left of the Main Screen and allows for
clinicians to admit or discharge patient's on Masimo Patient SafetyNet directly from Root.
Note: In order to use this feature Masimo Patient SafetyNet software version 5.0.1.0 or
higher is required.
Not Admitted
A Not Admitted message will appear on the Root screen when the sensor is placed onto a
patient and a patient has not yet been admitted on the Root. Press the Admit button on the
screen to admit the patient or press skip and the patient data will not be transmitted to the
Masimo Patient Safety Net.

Masimo Root Specifications

General

Category	Medical Equipment
Display	10.1 inch touchscreen
Connectivity	WiFi, Bluetooth
Power Supply	AC power
Dimensions	26.8 cm x 22.4 cm x 5.1 cm
Ports	USB, Ethernet
Supported Parameters	SpO2, Pulse Rate
Compatibility	Masimo sensors
Model	Root