Root NIBPT Chapter 15: Specifications
www.masimo.com 145 Masimo
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter
in watts (W) according to the transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
Symbols
The following symbols may appear on the product or product labeling:
Symbol Description Symbol Description
Follow instructions for use
Consult instructions for use
Mark of conformity to
European medical device
directive 93/42/EEC
ETL Intertek certification
See Declarations on Page 1
for certifications
Protection against
vertically falling water
drops
Fuse replacement- Only
replace with time-delay fuses
specified in this Instructions
for Use
Defibrillation-proof. Type
BF applied part
Type BF applied part
NIBP
Arm Circumference
Artery symbol and arrow
should be placed over
brachial or femoral artery
Cuff index line must fall
within range markings for an
accurate measurement
To Next Page
Loading...
Need help?
General
