Root NIBPT Chapter 2: Setting Up
www.masimo.com 26 Masimo
Power On
The Power Button can be used for Power On, Sleep, and Power Off. To Power On, press the
Power Button for two (2) seconds until a single audible tone sounds.
Once Root turns on, if no Radical-7, Radius-7, or MOC-9 module is connected, the Root display
shows the following message: Please Connect a Device. The user is now able to connect
Radical-7, Radius-7, and MOC-9 module.
For information about Sleep Mode and Power Off, see Sleep and Power Off on page 88.
To Next Page
Loading...
