EasyManua.ls Logo

Matrot M24D Hellios - 1.2. Safety hammer; 1.3. General safety information

Default Icon
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 2011
User notice
M24D Hellios
V 1.0
148 237 000
148 236 000
Label 24
1.2. Safety hammer
An emergency "glass breaker" hammer is located on the right
upright of the cab.
Use this hammer to break the side and rear windows and exit the
vehicle if necessary.
1.3. General safety information
- Generally, if the driver must leave the cab, the following actions should be completed first:
•Stopthespraypump;
•Settheparkingbrake;
•Cutthecombustionengine.
- Use caution when dismantling components.
-
When dismantling spray components, avoid spilling product on the soil.
- When dismantling heavy parts, place props under the parts in question.
- Dismantle hoses with caution.
- No residual pressure must remain in the circuit.
- Prepare a container to collect any oil spillage.
- Make sure the tools are in their resting position.
Refer to these instructions
for information on a
specific operation.
For all servicing and
adjustment operations,
cut the engine, remove
the key and refer to these
instructions.
Label 23

Table of Contents