Photo 48
2011 49
User notice
M24D Hellios
V 1.0
2
1
6.1.4. Practical tips
a) If a hydrostatic pump or hose must be
changed for the pump, after assembly and
before starting the engine, fill the pump
casing using the drainage pipe orifice ①.
b) Sealing on hydraulic circuits must be
checked regularly.
c) The oil cooler must be cleaned regularly ②
(clean the honeycombs).
d) All dismantling and re-assembly operations
must be carried out in a clean location.
Never store the machine with the hydraulic circuit
empty.
Never start the combustion engine if the
circuit is empty of fluid.
SAFETY
If oil levels drop abnormally, an audio signal will activate
(system connected to the audio warning system) as well as
the cab indicator (photo 48).
Cut the combustion engine immediately and determine
the cause.
Top up with the recommended oil.
To Next Page
Loading...