Mazda 6 2009 - Use of Pulling Equipment; Prevent Short Circuits; Efficient Removal of Body Panels; Body Measurements

GENERAL INFORMATION
00-00–12
Use of Pulling Equipment
• When using pulling equipment, keep away from
the pulling area and use safety wires to prevent
accidents.
Prevent Short Circuits
• Turn the ignition switch to the LOCK position.
• Disconnect the battery cables.
• Securely connect the welding machine ground
near the welding area.
End Of Sie
EFFICIENT REMOVAL OF BODY PANELS
id000000600300
Body Measurements
• Before removal or rough-cutting, first measure the
body at and around the damaged area against
the standard reference dimension specifications.
If there is deformation, use frame repair
equipment to make a rough correction.
SAFETY WIRES
am3uub0000007
Battery cable
acxuub00000042
GROUND
am3uub0000007
acxuub00000065
3442-1U-09G.book 12 ページ ２００９年７月２２日 水曜日 午前１１時７分