BODY STRUCTURE [PANEL REPLACEMENT]
09-80B–87
09-80B
REAR FLOOR PAN INSTALLATION [PANEL REPLACEMENT]
id098008742800
Symbol Mark
Installation Procedure
1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.
2. Drill holes for the plug welding before installing the new parts.
3. After temporarily installing new parts, make sure the related parts fit properly.
4. Apply spot sealer to the areas where both the overlapping ends of the new and existing parts will be welded.
Adhere the sections to be welded, and fillet weld along both seams.
5. Apply body sealer to the joints of old and new parts for waterproofing and rust protection.
SYMBOL MARK
MEANING
PLUG WELDING (
CO
2
ARC WELDING)
am2zzb0000003
7)$HOࡍࠫ㧞㧜㧜㧥ᐕ㧣㧞㧞ᣣޓ᳓ᦐᣣޓඦ೨㧝㧝ᤨ㧠㧟ಽ
To Next Page
Loading...
