Page 74
DLL MEDAQLib
optoNCDT 1402
DLL MEDAQLib12.
The Micro-Epsilon Data Acquisition Library offers you a high level interface library to access optoNCDT laser
sensors from your Windows application in combination with
RS422/USB converter (optional accessory) and a suitable PC1402-3/D-SUB/9pol cable or -
PC1402-3/USB cable or -
IF2008 PCI interface card and PC1402-3/IF2008 cable -
into an existing or a customized PC software.
You need no knowledge about the sensor protocol to communicate with the individual sensors. The individu-
al commands and parameters for the sensor to be addressed will be set with abstract functions. MEDAQLib
translates the abstract functions in comprehensible instructions for the sensor.
MEDAQLib
is a DLL/LIB usable for C, C++, VB, Delphi and many other Windows programming languages, -
supports functions to talk to the sensor -
hides the details on how to talk to the communication interface (RS232,RS422,USB,TCP) -
hides the details of the sensor protocoll -
converts the incoming data to „expected data values“ -
provides a consistent programming interface for all Micro-Epsilon sensors -
provides many programming examples many different programming languages -
the interface is documented in a large *.pdf file -
You will find the latest MEDAQLib version at:
www.micro-epsilon.com/link/software/medaqlib
To Next Page
Loading...
