12 (93) TX3 Touch Screen Installation Manual Version 3.4
Copyright 2015 LT-996
Introduction
configure Touch Screen options such as color and themes), the
Touch Screen panel must be set as an Master Node even if there is
no slave panel connected to it.
1.2 Features
Features of the TX3 series include:
• Stainless steel front panel
• Large touch screen display that eliminates the need for an external
directory
• Provisions for postal lock and camera
• Multilingual Display and Voice Greeting (English, French-Canadian and
Spanish) that provides instructions on how to use the Touch Screen
• Concierge/Security Desk/Guard Phone capability
• Card Access Interface
• Supports both Auto Dialer (ADC) and NSL (no phone bill)
• Ability to network panels together (peer-to-peer)
• Hands free, full duplex communication
• Flexible one to four digit resident dial codes
• Dials up to 18-digit telephone numbers
• System can be configured locally using the touchscreen or a computer with
the TX3 configuration software
• Upload/download configuration files without taking the whole system off-
line
• Programming from one location
• Records a maximum of 5000 event logs
• Elevator restriction capability
• Schedule-based call restrictions provide more security and flexibility
• Capability of one person testing the NSL controller without using the
Touch Screen
• Industry Canada and F.C.C. approved
1.3 Touch Screen Sizes and Enclosures
There are three types of enclosures for the 15 inch Touch Screen: kiosk, surface
mount, and flush mount.
To Next Page
Loading...