Version 3.4 TX3 Touch Screen Installation Manual 3 (93)
LT-996 Copyright 2015
Contents
1 Introduction 7
1.1 TX3 Systems 8
1.2 Features 12
1.3 Touch Screen Sizes and Enclosures 12
1.4 Touch Screen Accessories 13
1.5 Warranty and Special Notices 14
1.6 About This Manual 14
1.7 Contact Us 15
2 Enclosure Installation 17
2.1 Installing the Enclosures and Touch Screen 18
2.2 Installing the 15” Kiosk 19
2.3 Installing the 15” Touch Screen Surface Mount Enclosure 25
2.4 Installing the 15” Touch Screen Flush Mount Enclosure 28
2.5 Installing the 22” Touch Screens 32
2.6 Assembling the TX3-T-KIOSK Stand 38
2.7 Installing the Power Supply Enclosure 46
3 Touch Screen System and Setup 51
3.1 Touch Screen System 52
3.2 Touch Screen Panels 55
3.3 Controller Boards 58
3.4 Grounding the 15” Touch Screen 61
3.5 Grounding the 22” Touch Screen 61
3.6 Connecting to the External Power Supply 62
3.7 Installing the Postal Lock 64
3.8 Installing the Telephone Lines 64
3.9 Installing Optional Components 64
3.10 Verifying Installed Components 66
3.11 Beginning Configuration 67
3.12 Shutting Down the Touch Screen 68
3.13 Installing a Logitech c615 HD Webcam on the 22” Touch Screen 69
3.14 Replacing the 3M™ Multi-Touch Display C2167PW on the 22” Touch
Screen 70
3.15 Installing the TX3-P300-HA Card Reader in the 22” Touch Screen 74
3.16 Installing a RB-MD-1093 Two Door Controller Network Board 76
4 Adding Controllers 77
4.1 Adding a Controller 78
5 Appendix 79
5.1 Specifications 80
6 Resident Operating Instructions 83
6.1 NSL Resident Operating Instructions 84
6.2 ADC Resident Operating Instructions 86
Warranty & Warning Information 87
Special Notices 90
To Next Page
Loading...