EasyManua.ls Logo

Microm TX3 Series - Replacing the 22-inch Touch Screen Display

Default Icon
93 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
70 (93) TX3 Touch Screen Installation Manual Version 3.4
Copyright 2015 LT-996
Touch Screen System and Setup
3.14 Replacing the 3M™ Multi-Touch Display C2167PW
on the 22” Touch Screen
The 22” Touch Screen incorporates a 3M™ Multi-Touch Display
C2167PW (ID: 98000342422). If you need to replace it, follow these
instructions.
To remove the old display
1. Shut down the 22” Touch Screen and disconnect the power.
2. Open the 22” Touch Screen door.
3. Unplug the power, USB and DVI cables.
The display is attached to two brackets (CH-1165), which are secured to
four posts on the door.
All manuals and user guides at all-guides.com

Table of Contents