6 (93) TX3 Touch Screen Installation Manual Version 3.4
Copyright 2015 LT-996
Figure 32 Attach the 22” Touch Screen to the stand 44
Figure 33 Attach the 22” Touch Screen to the stand 45
Figure 34 Inside the Switching Power Supply Box 46
Figure 35 Power Supply Voltage Selection Switch 47
Figure 36 Touch Screen Power Supply Enclosure 48
Figure 37 Single Touch Screen 53
Figure 38 Single Touch Screen with ADC and NSL Lines 54
Figure 39 15” Touch Screen Panel Components 55
Figure 40 22” Touch Screen Inside Door 57
Figure 41 Controller Board Panel for 15” Touch Screens 58
Figure 42 Controller Board Panel for 22” Touch Screens 59
Figure 43 Controller Board Connectors - Top 60
Figure 44 Controller Board Connectors - Bottom 61
Figure 45 Grounding the 22” Touch Screen 62
Figure 46 MD-990 Terminal Block Wiring 63
Figure 47 Connecting additional RS-485 Terminal Connector to the First or Last Node of
Network 66
Figure 48 Position of the camera on the 22” Touch Screen door 69
Figure 49 Inside of door showing position of the four #6-32 nuts 71
Figure 50 The two brackets (CH-1165) holding the display 72
Figure 51 Power button 73
Figure 52 Position of the TX3-P300-HA Card Reader 74
Figure 53 The TX3-P300-HA Card Reader 75
Figure 54 TX3-P300-HA and Bracket 75
To Next Page
Loading...