When Nozzle Clogging Cannot Be Solved
4-19
1
1
1
4
Routine Maintenance
11
Perform the procedures from 9 to 10 on all ports which have to be purged the air.
• Attach the jig to the port from which you want to purge air and press the key to release air
from the machine.
12
Press the key.
13
Press the key.
14
Remove the jig and attach the cap.
• When you have removed the jig, quickly attach the cap.
15
After attaching the cap, press the key.
• Negative pressure control restarts and wiping begins.
16
Press and select “END” or “RETRY”.
• If “END” is selected, cleaning is performed.
When cleaning is completed, continue to Step 18.
• If “RETRY” is selected, the display returns to the screen of Step 2.
Select the other port and perform air purging.
17
Press the key several times to end the setting.
18
Close the maintenance cover.
• The carriage might move rapidly. Be careful not to place hands, your head or other body
parts near the carriage.
• Be sure to always press the key so that minute negative pressure is applied
in the machine before attaching or removing the jig.
• After the work has been completed, attach the removed cover as soon as possible. If you
leave it for a long time, UV light may affect ink.
AIR PG
COMP L ET ED [ ENT ]
REMOVE TOOL
COMP L ET ED [ ENT ]
PLEASE WA I T
To Next Page
Loading...
