MIMAKI JFX200-2531 - Operation Panel

Names of Parts and Functions
1-5
1
Before Use
3
4
5
6
Operation Panel
Use the operation panel to make settings for printing or operate this machine.
The panel is installed at two positions: On the front side and the rear side.
key
Press to perform the absorption
operation on the entire table.
key
Press to elevate the carriage.
key
Press to down the carriage.
JOG key
Use these keys to shift the carriage or the Y-
bar in [LOCAL]. Also use them to select an
item of printing conditions.
Display
Displays the status of the machine, set items and errors.
POWER Lamp
Lit when the power is ON.
key
Prints test patterns to check if there are
any printing failures such as ink clogging.
key
Head cleaning at ink clogging.
key
Deletes the data that have been received.
key
Press to use each function.
key
Press to finish the setting or
cancel te setting.
key
Toggles the printing area while
the toggle print function is
enabled.
key
Performs the maintenance
function such as station
maintenance.
key
Switching the Remote and the
Local, and vice versa.
key
Press to determine a setting.