Operation panel
This panel has the operation keys required for
operating the machine and the LCDs for displaying
setting items, etc.
Waste ink tank
Waste ink gathers in this tank.
Suction valve
Switch at setting media.
Power button
*1
Turns on/off the power to
the machine.
*1 : When the power supply button is turned ON, it lights in green, and when it is OFF, it goes out. The ink clogging
prevention function is periodically operated even when the power button is OFF. (Auto maintenance function)
Carriage
The carriage is provided with the
heads for printing.
Warning light
Indicates the machine
status or absorption
status.
Foot switch
Use the foot switch when performing the
absorption operation on the table unit.
Y-bar
Moved on the table at printing.
FRONT-side table
Functions are same as Rear-side
table.
REAR-side table
Setting media on it.
There are absorbing holes on the table so that media is absorbed
when vacuum is ON.
To Next Page
Loading...
