MIMAKI JFX200-2531 - Ink bottle warning appears

5-4
Ink bottle warning appears
If an ink bottle trouble is detected, the bottle LED “red” is lit, and a warning message appears.
None of printing, cleaning and all the other operations that use ink is available.
If an abnormality occurs, perform the following procedures:
• Check that the IC chip in the ink cover is correctly set.
• Replace the ink bottle in question immediately.
Displaying the description of ink bottle trouble
The contents of ink bottle error are confirmable by the following operations.
1
Press the key in LOCAL.
2
Press the key.
• When multiple bottle defects occur and if you press the key or , they are displayed
by turns.
• Once ink bottle trouble is displayed, do not leave the ink bottle without replacing it for a long time;
otherwise, the machine will lose the nozzle clogging prevention function.
If nozzles are clogged, the machine must be repaired by MIMAKI's service engineer.
LUS - 150 MMCCYYKK
REMAIN 34567899
NON I NK I C
MMCCYYKK