3-36
Setting Auto Cleaning
You can set the machine so that it counts the number of printed files or the length after printing has been
completed, and performs cleaning automatically if required.
The machine can perform a stable printing operation with its heads always kept clean.
1
Press the key in LOCAL.
2
Press to select [SET UP].
3
Press the key.
4
Press to select [AUTO CLEANING].
5
Press the key.
6
Press to select the type of auto cleaning.
• When you select auto cleaning “PAGE”, after set number of
printings has been completed, head cleaning will be performed
automatically.
• If you do not set auto cleaning, first select “OFF” and then proceed
to the Step 11.
7
Press the key.
8
Press to set the cleaning interval.
• Setting value : 1 to 1000 page
9
Press the key.
10
Press to set the cleaning type.
Set Value : NORMAL/ SOFT/HARD
11
Press the key.
12
Press the key several times to end the setting.
• Depending on the state of the heads, etc., the image quality deterioration may not be improved even
with this function performed.In this case, contact our service office or the distributor in your region.
SETUP
DROP . POS c o r r e c t [ ENT ]
SETUP
AUTO CLEAN I NG [ ENT ]
To Next Page
Loading...
