MIMAKI JFX200-2531 - How to Check Printing Area While Toggle Printing Is Enabled; Changing the Printing Area

3-12
How to check printing area while toggle printing is enabled
You can check the printing area from the local screen.
You can check the printing area from the local screen.
When [R] is displayed, printing is performed for the REAR-side area.
Changing the printing area
You can change the printing area.
1
Display the local screen.
2
Press the key.
• The printing area changes.
Changing the printing area without using [PRINT AREA]
You can change the printing area using the [FUNCTION] key in LOCAL in stead of using the [PRINT AREA]
key.
1
Press the key in LOCAL.
2
Press to select [TOGGLE PRINT].
3
Press the key.
Printing area
For FRONT side For REAR side
• When printing data has been received, the
printing area cannot be changed.
<LOCAL> R : 2 . 5mm
[F] : 2.5mm
<LOCAL> [R] : 2 . 5mm
F:2.5mm
<LOCAL> R : 2 . 5mm
[F] : 2.5mm
<LOCAL> [R] : 2 . 5mm
F:2.5mm
FUNCT I ON
VIEW [ENT]
FUNCT I ON
TOGGLE PR I NT [ ENT ]
TOGGLE PR I NT
TOGGLE PR I NT [ ENT ]