4-40
Clean with Electrode Probe Cleaning Kit (SPA-0237)
Explain the filter exchange method of Electrode Probe Cleaning Kit (SPA-0237).
1
Soak the filter of electrode probe cleaning kit for
the cleaning unit in alcohol.
2
Vover the electrode probe cleaning kit, and gently
turn two or three times.
• The filter of electrode probe cleaning kit wipes away stains on
the electrode probe.
• If it is very dirty, replace the filter and clean it again.
• Do not touch the electrode probe directly. You may get injured. Be careful to work.
• Do not touch the electrode probe with a hard thing such as a tool. It may cause an accident or failure
of the machine.
Soak the Cleaning Kit
• Lids are included with the cleaning kit to prevent dust from entering the cleaning kit
during storage. Always put the lids on when storing.
• Also, a cord can be passed through the strap hole so that the kit can be hung on a
wall. Be sure to put on the lids during this storage method as well. (Please prepare
a strap on your own.)
Cleaning Kit Replacement Filter
• After the filter is used to clean multiple electrode probes, dust becomes attached
to the filter and the cleaning abilities are reduced.
• When grime becomes attached to the filter, replacement it with an electrode probe
cleaning kit replacement filter （SPC-0238）. (sold separately)
To Next Page
Loading...
