MIMAKI JFX200-2531 - Deciding the Setting Procedure for the Settings Related to FRONT;REAR Printing Area

Toggle Printing
3-9
1
1
3
Convinient use
5
6
8
Press the key several times to end the setting.
Deciding the setting procedure for the settings related to FRONT/REAR printing area
Two types of setting procedures are available.
• When the same data is printed using the same media for FRONT/REAR, setting to "COMMON" simplifies the
setting procedure for the settings related to the printing area.
• Setting to "INDIVIDUAL" enables printing to different media for FRONT/REAR respectively.
1
Press the key in LOCAL.
2
Press to select [TOGGLE PRINT].
3
Press the key.
4
Press to select [[F]/[R] SETUP].
5
Press the key.
6
Press to select a set value.
7
Press the key.
8
Press the key several times to end the setting.
INDIVIDUAL
The settings for each area are set individually.
COMMON
When the settings for one area are set, the same values are applied to the other area.
FUNCT I ON
VIEW [ENT]
FUNCT I ON
TOGGLE PR I NT [ ENT ]
TOGGLE PR I NT
TOGGLE PR I NT [ ENT ]
TOGGLE PR I NT
[F]/[R] SETUP [ENT]
[F]/[R] SETUP
:INDIVIDUAL [ENT]
[F]/[R] SETUP
: COMMON
TOGGLE PR I NT
[F]/[R] SETUP [ENT]