MIMAKI JFX200-2531 - If a Waste Ink Tank Confirmation Message Appears

4-28
If a Waste Ink Tank Confirmation Message Appears
Ink used in head cleaning, etc. is stored in the waste ink tank on the lower right side of the machine. This
machine counts the accumulated amount of discharged ink. When that reaches a specified amount, the
machine displays a confirmation message.(When this message is displayed, consider the replacement of the
waste ink tank.)
Confirmation Message in LOCAL
1
The message on the right is displayed.
2
Check the state of the waste ink tank
• When it is different from the actual amount, press and
correct.
• When you correct (80%), press the key to return to
LOCAL.
• When you replace (disposal) and clear the count, perform the
procedures in “Disposing of waste ink”. ( P.4-29)
• The message is displayed when it reaches 80% (2.1L ) of the 2.6L tank.
• If you simply delete the message by pressing the key, and go on using the printer without
disposing of the waste ink, then the waste ink could overflow from the waste ink tank.
<LOCAL>
Chec k was t e i nk [MNT ]
<LOCAL>
Leve l : 80%( 1 . 6L)