4-38
Ionizer maintenance
Cleaning the Electrode Probe Appears
Check the electrode probe before the work and clean it if it is dirty.
1
Remove the electrode probe from the ion the flushing
filter, the message on the right will appear.
• By using the attached electrode probe replacement kit, you can remove it easily.
(1) Put the replacement kit to the electrode probe.
(2) Remove the electrode probe.
• Before taking care of it, be sure to turn off the main power switch of the main body. You may get an
electric shock. Also, you may get injured collaterally.
• Do not touch the electrode probe directly. You may get injured. Be careful to work.
• After cleaning, fully dry it and then attach it to the ionizer to use.
• When washing liquid remains on the electrode probe, it may cause an accident or failure of the
machine.The cleaning alcohol may touch your skin or get in your eyes.
• Do not touch the electrode probe with a hard thing such as a tool. It may cause an accident or failure
of the machine.
Tools required for
maintenance
• Cleaning liquid for maintenance (SPC-0568)
• Alcohol • Gloves • Goggles
• Do not touch the electrode probe directly. You may get injured. Be careful to work.
• Do not touch the electrode probe with a hard thing such as a tool. It may cause an accident or failure
of the machine
To Next Page
Loading...
