MIMAKI JFX200-2531 - If Nozzle Missing Due to Color Mixture of Ink or Aeration

When Nozzle Clogging Cannot Be Solved
4-17
1
1
1
4
Routine Maintenance
If nozzle missing due to color mixture of ink or aeration
If nozzle missing occurs due to color mixture of ink in the head or aeration, push ink or air in the head out from
the port.
1
Select [AIR PG] of the maintenance menu.
(1) Press the key in LOCAL.
(2) Press to select [MAINTENANCE] and press the key.
(3) Press to select [AIR PG].
2
Press the key.
3
Press and select the ink port for which you
perform air purge.
• : Selects left side port
• : Selects right side port
• Move the Y bar as far forwards as possible and move the carriage
to above the wiper.
• Press the key to stop it in that position.
4
Open the maintenance cover.
5
Press the key.
• After the work has been completed, attach the
removed cover as soon as possible. If you
leave it for a long time, UV light may affect ink.
• Until the air purge jig setting is completed, [COMPLETED [ENT]] is displayed on the
screen. After the work up to the Step 8 is completed, press the key.
SELECT A I R PG
1< >2
MOV I NG NOW
PLEASE WA I T
SET TOOL
START [ ENT ]
Maintenance cover
SET TOOL
COMP L ET ED [ ENT ]