6-2
Specifications
Machine specifications
Print head
Method Drop-on-demand piezoelectric print heads
Specification 2 heads: 2-layered staggered arrangement in 1-line
Printing mode
(scan x feed)
4-colors
300x450HQ : Bi/Uni 6/12 pass
600x600 : Bi/Uni 8/16 pass
600x900 : Bi/Uni 12/24 pass
1200x1200 : Bi/Uni 16/32 pass
4-colors + White
300x450HQ : Bi/Uni 12/24 pass
600x600 : Bi/Uni 16/32 pass
600x900 : Bi/Uni 24/48 pass
1200x1200 : Bi/Uni 32/64 pass
Usable inks Dedicated UV curable in (Y, M, C, K, W, CL,P)
Ink supply
Supplying 1L x 8 bottles (For 4-color, UISS switching is available. Also,
UISS switching is available for M and C with 4-color + W)
Capacity of ink
bottle
4-colors 1L-bottle x 2 for each color
4-colors + White Y and K: 1 bottle each. M, C and W: 2 bottles each.
4-colors + White + Clear M, C, Y and K: 1 bottle each. W and CL: 2 bottles each.
4-colors + White + Clear +
Primer
M, C, Y, K, Cl and P: 1 bottle each. W: 2 bottles.
6 colors + White M, C, Y, K, Lc and Lm: 1 bottle each. W: 2 bottles.
Usable media
Size 2580mmx3210mm
Thickness 50mm or more
Weight Up to 50kg / m2. Prohibit concentrated load.
Max. printing width 2500x3100mm
Distance accu-
racy
Absolute accuracy Whichever the larger one of ± 0.3 mm or ± 0.3 % of the designated
Reproducibility Whichever the larger one of ± 0.2 mm or ± 0.1 % of the designated
Head height adjustment 1.2mm to 3mm (media thickness automatic recognition)
Media absorption Absorption fixing with vacuum unit
UV unit
UV LED lamp fitting (mounted on carriage)
UV power is mounted in the main body.
Waste ink tank Bottle type (3,200 cc)/ Detected by software counter
Interface USB 2.0
Command MRL- III
Noise
during standby Less than 55 dB
At operation
*1
*1. 73.5db(A), Operation condition: High-speed scanning, Blower is ON
Method: According to clause 1.7.4.2 of Machinery Directive 2006/42/EC
Less than 74 dB
Safety Standard
VCCI-Class A, FCC-Class A, UL 60950, CE Marking (EMC,Low Voltage
Directive,Machinery Directive, RoHS Directive), CB Report
Power
Inlet1
AC200 - 240 ± 10% , 50/60Hz ± 1Hz , 12A or less
(recommended circuit breaker is 30A)
Inlet2
AC200 - 240 ± 10% , 50/60Hz ± 1Hz , 8A or less
(recommended circuit breaker is 30A)
Power
consumption
Inlet1 2880W or less
Inlet2 1920W or less
Recomended
Environment
Available temp. 15 °C to 30 °C (59°F to 86°F)
Humidity 35 to 65% Rh (No condensation)
Guaranteed temp. 18 °C to 25 °C (64.4°F to 77°F)
Temperature change ± 10 °C / h or less
Dust 0.15mg/m
3
(Equivalent to normal office level)
Weight 1000 kg
Outside dimensions
4370 mm(W) x 4320 mm(D) x 1680 mm(H) (Including projection)
To Next Page
Loading...
