MIMAKI JFX200-2531 - Toggle Printing

3-7
1
1
3
Convinient use
5
6
Toggle Printing
You can divide the printing area into two areas and toggle the area for each printing.
While printing in one area, you can set a media for the other area to reduce the time required for media setting.
• When the toggle print function is enabled, printable size changes.
Toggle print function
OFF ON
Max. printing area 2500mm X 3100mm
FRONT side : 2500mm X 1300mm
REAR side : 2500mm X 1300mm
While printing the FRONT-side area, set the
media for the REAR-side area.
While printing the REAR-side area, set the
media for the FRONT-side area.
When the toggle print function is OFF When the toggle print function is ON
3100mm
1300mm1300mm
2500mm
2500mm