MIMAKI JFX200-2531 - Starting Toggle Printing

3-20
10
Press the key several times to end the setting.
Starting toggle printing
1
Set a media.
• To print continuously, set media for both FORNT/REAR areas.
2
Press the key to turn the vacuum ON.
3
Press the key to set the printing area.
4
Press the key in LOCAL.
• The screen changes to REMOTE, and data can be received from the PC.
5
Transmit data to be printed from the PC.
• The set value is not cleared by cutting the power.
• Before starting printing, check the settings.
Item Check
TOGGLE PRINT Whether set to "ON"
SETUP WORK CHANGE
Whether set to "ON" or "AUTO"
Whether VACUUM is set properly
Whether MODE is set properly
HEAD HEIGHT MEDIA THICKNESS
Whether set for both FRONT/REAR
areas.
SET ORIGIN
Whether set for both FRONT/REAR
areas.