MIMAKI JFX200-2531 - Page 75

Toggle Printing
3-21
1
1
3
Convinient use
5
6
6
Start printing.
7
After completion of printing, transmit data to be
printed to the other area.
8
Start printing for the other area.
9
Take out the media for the area where printing has
completed.
• When VACUUM in [WORK CHANGE] is set to OFF, the vacuum for the area where printing has
completed is automatically turned to OFF.
• When VACUUM in [WORK CHANGE] is set to ON, vacuum stays ON. Press the foot switch for the area
where printing has completed to turn OFF the vacuum.
10
Set a media.
11
Press the foot switch to turn ON the vacuum.
• Press the foot switch for the area where the media is set to turn ON the vacuum.
12
Repeat steps 7 to 11.
• Do not turn OFF the vacuum using the key.
Doing so turns OFF the vacuum for the area where printing is in progress.
• Do not press the key.
Doing so turns OFF the vacuum for the area where printing is in progress.