3-25
1
1
3
Convenient use
5
6
Correct the ink drop position for bidirectional printing
9
Press to correct the dot position of Pattern
1~.
• Corrected feeding rate: -40.0 to 40.0
• Check the test patterns. The position where an outward feeding line and a return feeding line become
one straight line is the correction value.
• When the correction value in not between -40.0 and 40.0, adjust the height of the printing heads and
then perform the operations in Step 2 and later.
10
Press the key.
• Displays the next pattern input.
• Repeat step7.
11
Press the key several times to end the setting.
To Next Page
Loading...
