12-14 DICOM
DICOM query/retrieve setting items are described as follows:
Name Description
Device
After you set the server (s) in DICOM Server Preset screen, the
name (s) will appear in the drop-down list, select the name of
the server.
Service Name Default: xxx-Store, and it can be modified
AE Title Application Entity title
Port
DICOM communication port, 104 is default. Here, the port
should be consistent with that of the query/retrieve server port.
Maximum Retries Reserved feature.
Interval Time(s) Reserved feature.
Timeout
Value: 5－60s, in increments of 5s, and 15 by default.
Add Add the DICOM service to the service list
Cancel Click to cancel parameter setting
Delete Click to delete the selected service in the service list
Update
Select an item in the service list, change the parameters in the
above area, and click [Update] to update the item in the service
list.
Verify
Click to verify if the two DICOM application entities are
normally connected.
Default
Select an item in the service list, click [Default] and you can see
“Y” in the Default column.
To Next Page
Loading...
Need help?
General
