Probes and Biopsy 13-21
No. Name Description
<7> Guiding block Used for installing biopsy needle; there are five
specifications of guiding blocks for different biopsy
needles.
<8> Specification of guiding
block (14G)
Matched with the corresponding biopsy needle
(14G).
<9> Guiding hole of the biopsy
needle
Used for installing the biopsy needle.
<10> Pinch nut of needle-guided
bracket
Used for locking the needle-guided bracket and the
probe.
Plastic/needle detachable needle-guided bracket:
No. Name Description
<1>
Support of
needle-guided
bracket
Used for installing the needle-guided bracket on the
probe.
<2> Angle block
Used for determining the angle of the biopsy; there are
three specifications of blocks of angle.
<3> Guiding block
Used for installing biopsy needle; there are five
specifications of guiding blocks for different biopsy
needles.
<4>
Groove and tab of
the needle-guided
bracket
Respectively matches with the tab and groove of the
probe.
<5>
Specification of
guiding block
(13G)
Matched with the corresponding biopsy needle (13G).
<6>
Guiding hole of the
biopsy needle
Used for installing the biopsy needle.
<7>
Specification of
angle block (45°)
The corresponding biopsy angle is 45°.
To Next Page
Loading...
Need help?
General
