Minebea CSD-701B - 11−9. Standard specifications at the shipment; 11−10. Accessories; 11−11. Options; 11−11−1. Current output

135
11−9. Standard specifications at the shipment
Bridge power supply DC5 V
Span adjustment 2 000 display at the input of 0.5 mV/V.
The minimum scale 1
Analog output 0 V to 5. 000 V at the display of 0 to 2 000 display
11−10. Accessories
Instruction manual 1 piece
Midget fuse 1 piece (2 A)
Unit seal 1 piece
Panel mounting
attachment 2 pieces
Panel mounting
gasket 1 piece
BCD output plug 1 piece(Attached only when optional BCD output is installed.)
11−11. Options
11−11−1. Current output
･ P/N CSD701B-P07
･ Specifications
Output DC4 mA to 20 mA Load resistance at 260 Ω or less
Non−linearity 0.05 %F.S.
Resolution Approx.1/10 000
Over range “−OL” display at approx.DC0 mA and “OL” display at approx.DC24 mA.
※Voltage output isn’t available when this option is installed.
11−11−2. BCD output
･ P/N ：CSD701B−P15
･ Specifications
Output ・BCD 5 digits Parallel output, with polarity(POL.) applied
(Output ON with minus, and output OFF with plus.)
・P.C.(Print command)
ON for a fixed time after conversion of BCD output is completed.
・ERROR ON at the time of various errors are occurred.
・OVR(over)
Above are open collector outputs. V
CE
＝DC30 V, I
C
＝DC20 mA MAX
※Renewal of output can’t be made in other than the Measurement mode.
Input ・BCD−ENABLE Compulsive OFF for the related output of BCD
(Hi impedance)
※The input is effective upon the short circuit at 100 ms or more.
11−11−3. RS−232C interface
･ P/N CSD701B−P74
･ Specifications
Baud rate ：Select from 1 200, 2 400, 4 800, 9 600 and 19 200 bps
Data length ：Select from 7 bits or 8 bits.
Parity bit ：Select from Non, Even or Odd.
Stop bit ：Select from 1 bit or 2 bits.
Terminator ：Select from CR＋LF or CR.
Communication method：Half-duplex