Minebea CSD-701B - Reading out the Comparative Data

99
2
Reading out the comparative data (Host→CSD−701B)
Command No.
Operation
31 Reading out S1 data
32 Reading out S2 data
Return(CSD−701B→Host)
2 4 6 8 10 12 14
@ 0 0 3 1 Terminator
Command No.
Sign
Set value
D The load data enters from the right end.
D When the data is minus, “−” sign and when plus, “＋” sign is added.
D The sign data performs zero suppress.
D In case that the decimal point is set with the F−56, and at the same time the
decimal point is specified with the F−01, it will be added to the specified
position.
3
Writing comparative data(Host→CSD−701B)
2 4 6 8 10 12 14
@ 0 0 6 1 Terminator
Command No.
Sign
Set value
Command No. Operation
61 Writing the S1 data
62 Writing the S2 data
Return(CSD−701B→Host)
2468101214
@ 0 0 6 1 Terminator
Command No.
Sign
Set value
D The set value enters from the right end.
D Setting range is from −99 000 to 99 999.
D Never add the decimal point.
246
@ 0 0 3 1 Terminator
Command No.