Minebea CSD-701B - Page 94

81
Procedures
4
Press the  key.
Content of setting Function that has selected will
be displayed and the digit of 10
0
will flash on and
off.
Change the setting with the right keys.
Press the
 key to suspend the setting of
Function mode, then return to the measurement
mode.
 ke
y
：Se
t
value carr
y
ke
y
 It can be increased continuously by the
continuity press of the key.

key
：
Set
value
carry
key
 key ：Set value inclement key
 key ：Set value initialization key
5
Press the  key.
The set contents are registered, then the load
display will return to the registered Function
No., and the 10
0
digit will flash on and off.
Press the
 key.
Setting another Function No. is desired, return
to step 3.
6
Press the  key.
Quitting the Function mode, the Measurement
mode can be returned.