Mitsubishi F700 Series User Manual

356
Inspection item
Reinstallation (00083 to 03610)
1)After confirming the orientation of the fan, reinstall the fan so that the arrow on the left of "AIR FLOW" faces up.
2)Reconnect the fan connectors.
3)Reinstall the fan cover.
<Fan side face>
AIR FLOW
00083, 00126
00170 to 00380
00470, 00620
00770 to 03610
2. Insert hooks until
you hear a click
sound.
1. Insert hooks into
holes.
00083, 00126
2. Insert hooks until
you hear a click
sound.
1. Insert hooks into
holes.
00170 to 00620
2. Insert hooks until
you hear a click
sound.
1. Insert hooks into
holes.
00770 to 03610
CAUTION

Installing the fan in the opposite air flow direction can cause the inverter life to be shorter.
When installing the fan, use care to prevent wires from being caught between the inverter and fan.
Switch the power off before replacing fans. Since the inverter circuits are charged with voltage even after power off,
replace fans only when the inverter cover is on the inverter to prevent an electric shock accident.

Mitsubishi F700 Series Specifications

General

Humidity	95% RH or less (non-condensing)
Control Method	V/F control
Protection Features	Overcurrent, overvoltage, undervoltage, overheat, short circuit
Communication Options	RS-485
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C
Altitude	Up to 1000m above sea level
Overload Capacity	150% for 60 seconds
Cooling Method	Forced air cooling
Power Range	0.75 to 630 kW (1 to 845 hp)
Output Voltage	3-phase 200 to 240 VAC, 380 to 500 VAC (matching input voltage)