To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi F700 Series and is the answer not in the manual?
General| Humidity | 95% RH or less (non-condensing) |
|---|---|
| Control Method | V/F control |
| Protection Features | Overcurrent, overvoltage, undervoltage, overheat, short circuit |
| Communication Options | RS-485 |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +65°C |
| Altitude | Up to 1000m above sea level |
| Overload Capacity | 150% for 60 seconds |
| Cooling Method | Forced air cooling |
| Power Range | 0.75 to 630 kW (1 to 845 hp) |
| Output Voltage | 3-phase 200 to 240 VAC, 380 to 500 VAC (matching input voltage) |
General safety instructions and handling precautions to ensure product life and prevent damage.
Comprehensive list of all parameters, their settings, and descriptions.
Instructions for adjusting motor torque and current for optimal performance.
Instructions for making frequency settings using external terminals.
Details on setting acceleration/deceleration times and patterns for smooth motor control.
Guidance on selecting and protecting the motor, including thermal relay functions.
Describes DC injection brake, regenerative brake, and stop selection methods.
Instructions for assigning functions to external terminals for control.
Covers automatic restart and deceleration-to-stop functions during power failures.
Details on configuring retry functions and fault code outputs for troubleshooting.
Instructions for setting frequency using analog inputs via terminals.
Information on PID control functions for process control applications.
Troubleshooting guide for common error messages, warnings, and faults.
Troubleshooting guide for common issues like motor not starting or abnormal noise.
