Mitsubishi F700 Series User Manual

396
REVISIONS
*The manual number is given on the bottom left of the back cover.
Print Date *Manual Number Revision
May 2004 IB(NA)-0600193ENG-A
First edition
Aug. 2004 IB(NA)-0600193ENG-B
 FR-F740 - 02600 to 03610 - EC
 Pr.299 Rotation direction detection selection at restarting
Oct. 2004 IB(NA)-0600193ENG-C
 FR-F740 - 04320 to 12120 - EC
Jun. 2005 IB(NA)-0600193ENG-D
Partial modification
 Panel cut dimension of heatsink protrusion
May 2006 IB(NA)-0600193ENG-E
Partial modification
 Panel cut dimension of heatsink protrusion
 Pr. 539 Modbus-RTU communication check time interval
 Voltage/current input switch
Jul. 2008 IB(NA)-0600193ENG-F
 Additional explanation to "Causes and corrective actions"
 Addition of setting values "10" and 11" to Pr. 495 Remote output selection
Sep. 2009 IB(NA)-0600193ENG-G
 Pr. 29 setting value "6", Pr. 30 setting value "10", "11", "20", "21", Pr. 59 setting
value "11 ", "12 ", "13 ", Pr.128 setting value "110", "111", "120", "121",
Pr.167 setting value "10", "11", Pr. 261 setting value "21", "22",
 Pr.522, Pr.553, Pr.554, Pr.653, Pr.654, Pr.799, C42 (Pr.934), C43 (Pr.934), C44
(Pr.935), C45 (Pr.935)
 DC feeding operation permission signal (X70), DC feeding cancel signal
(X71), PID integral value reset signal (X72)
 PID deviation limit signal (Y48), Pulse output of output power signal (Y79),
DC feeding signal (Y85)
 Pr.153 setting range "0 to 10s"
 5.5 Check first when you have a trouble
Apr. 2012 IB(NA)-0600193ENG-H
 Pr. 147, Pr. 296, Pr. 297, Pr. 390, Pr. 414, Pr. 415, Pr. 498, Pr.502, Pr.505 to Pr.515,
Pr.561, Pr.665, Pr.726 to Pr.729, Pr.753 to Pr. 769, Pr.774 to Pr. 779, Pr.826 to Pr.
865, Pr. 870, Pr. 986, Pr. 997, Pr. 999
 Setting value of Pr. 30, Pr. 52, Pr. 54, Pr. 128, Pr. 158, Pr. 178 to Pr. 189, Pr. 190 to
Pr. 196, Pr. 331, Pr. 332, Pr. 549, Pr. 573
 Option connector 2
 Easy operation mode setting
 Function enhancement of Mitsubishi inverter protocol/Modbus-RTU protocol
communication
 BACnet MS/TP protocol
 PLC function
 Initial value change list function
 Protective function (LOCD, E.2, E.OP2, E.PCH, E.LCI)
Addition
Addition
Addition
Addition
Addition
Addition
Partial modification
Addition
IB(NA)-0600193ENG-H

Mitsubishi F700 Series Specifications

General

Humidity	95% RH or less (non-condensing)
Control Method	V/F control
Protection Features	Overcurrent, overvoltage, undervoltage, overheat, short circuit
Communication Options	RS-485
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C
Altitude	Up to 1000m above sea level
Overload Capacity	150% for 60 seconds
Cooling Method	Forced air cooling
Power Range	0.75 to 630 kW (1 to 845 hp)
Output Voltage	3-phase 200 to 240 VAC, 380 to 500 VAC (matching input voltage)