Mitsubishi F700 Series User Manual

67
Parameter List
Parameter list
4
PARAMETERS
*1 Differ according to capacities.
6%: 00023
4%: 00038 to 00083
3%: 00126 and 00170
2%: 00250 to 00770
1.5%:00930 and 01160
1%: 01800 or more
*2 Differ according to capacities.
01160 or less / 01800 or more
*3 Differ according to capacities.
00170 or less / 00250 or more
*4 Differ according to capacities.
4%: 00170 or less
2%: 00250 to 01160
1%: 01800 or more
*5 The parameter number in parentheses is the one for use with the parameter unit (FR-PU04/FR-PU07).

989
Parameter copy alarm release 10/100 1 10/100 321
PU
990
PU buzzer control 0, 1 1 1 313
991
PU contrast adjustment 0 to 63 1 58 313

997
Fault initiation
16 to 18, 32 to 34, 48,
49, 64, 80 to 82, 96, 112,
128, 129, 144, 145, 160,
161, 162, 164 to 168,
176 to 179, 192 to 194,
196 to 199, 228, 229,
230, 241, 242, 245 to
247, 253, 9999
1 9999 304

 999
Automatic parameter setting
1, 2, 10, 11, 20, 21, 30,
31, 9999
1 9999 305
Clear
parameter
Pr.CL
Parameter clear 0, 1 1 0 319
ALLC
All parameter clear 0, 1 1 0 320
Er.CL
Faults history clear 0, 1 1 0 324

PCPY
Parameter copy 0, 1, 2, 3 1 0 321

Pr.CH
Initial value change list 323

AUTO
Automatic parameter setting 305
Function Parameters
Name Setting Range
Minimum
Setting
Increments
Initial
Value
Refer
to
Page
Customer
Setting

Mitsubishi F700 Series Specifications

General

Humidity	95% RH or less (non-condensing)
Control Method	V/F control
Protection Features	Overcurrent, overvoltage, undervoltage, overheat, short circuit
Communication Options	RS-485
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C
Altitude	Up to 1000m above sea level
Overload Capacity	150% for 60 seconds
Cooling Method	Forced air cooling
Power Range	0.75 to 630 kW (1 to 845 hp)
Output Voltage	3-phase 200 to 240 VAC, 380 to 500 VAC (matching input voltage)