M800S/M80/E80 Series Connection and Setup Manual
17 Setting the Hardware
388
IB-1501269-J
17.5 Connecting the Batteries
17.5.1 Control Unit Battery
The battery is not connected when the machine is delivered. Be sure to connect the battery before
starting up.
A lithium battery in the control unit battery holder retains parameter settings, machining programs and the like, which
requires to be backed up at the power OFF.
[Precautions for handling battery]
(1) Do not disassemble the battery.
(2) Do not place the battery in flames or water.
(3) Do not pressurize and deform the battery.
(4) This is a primary battery so do not charge it.
Battery Q6BAT
Battery cumulative data holding time 45,000 hours (At 0 to 45°C. The life will be shorter if the temperature is high.)
Battery life Approx. 5 years (from date of battery manufacture)
CAUTION
Do not short-circuit, charge, overheat, incinerate or disassemble the battery.
To Next Page
Loading...
