Mitsubishi M80 series

M800S/M80/E80 Series Connection and Setup Manual
17 Setting the Hardware
395
IB-1501269-J
17.6.2 Connection and Station No. Setting on Remote I/O Unit
When connecting directly to the control unit
(Note) Connect the J210 cable to the RIO1 or RIO2 connector of the control unit.
Check the connector position with the actual machine.
RIO1
RIO2
J210
J210
Control unit
Remote I/O unit
Remote I/O1ch
Remote I/O2ch
Max.64
stations
Max. input: 2048 points
Max. output: 2048 points
Max.64
stations
Max. input: 2048 points
Max. output: 2048 points