Mitsubishi M80 series User Manual

M800S/M80/E80 Series Connection and Setup Manual
20 Sequence Program Writing
447
IB-1501269-J
20.12 Setting the PLC Parameters
Select [Bit select] on the Mainte screen and set the bit selection parameters from #6449 to #6452.
See the following table for details of the parameters.
(Note 1) Be sure to set the bits indicated - and blanks to 0.
(Note 2) Functions marked with ■ may not be available for some machine types.
0
-
-
--
-
-
--
-
-
0
1
2
3
1234567
Symbol
name
#6449
R7824 L
#6450
R7824 H
#6451
R7825 L
#6452
R7825 H
0
1
Branch
destination
label check
valid
External
alarm
message
display
■
Control unit
thermal
alarm on
Counter C
retention
Integrated
timer ST
retention
PLC counter
program
valid
PLC timer
program
valid
Setting and
display unit
thermal
mgmt valid
■
Alarm/
operator
change ■
Full screen
display of
message ■
Operator
message
valid
Alarm
message
valid
F method
R method
-
Serial handy
terminal
communica-
tion valid
Built-in edit
function
edit invalid ■
Built-in edit
function
edit valid ■
Battery alarm
/ warning
detection
disabled
-

Mitsubishi M80 series Specifications

General

Type	CNC Control Unit
Power Supply	24V DC
Interpolation	Linear, circular, helical
Fieldbus	CC-Link
Operating Temperature	0 to 45°C
Interface	USB, RS-232
Processor	RISC processor
Ethernet	Yes (100BASE-TX/10BASE-T)