Mitsubishi M80 series User Manual

Mar. 2017 IB(NA)1501269-E The contents were corrected to correspond with the system software C3 version.
- The following units were added.
FCU8-DX213-1 (Remote I/O unit)
FCU8-DX654-1 (Remote I/O unit)
FCU8-DX408 (Remote I/O unit)
FCU8-EX565 (Communication expansion unit)
FCU8-EX703 (Option relay unit)
FCU8-KB921 (MITSUBISHI CNC Machine operation panel)
FCU8-KB923 (MITSUBISHI CNC Machine operation panel)
FCU8-KB931 (MITSUBISHI CNC Machine operation panel)
Handy terminal
- The following chapters and sections were added.
3.13 MITSUBISHI CNC Machine Operation Panel
3.14 Handy Terminal
3.16 Thermistor Sets
4.11.3 EtherNet/IP (FCU8-EX565)
4.11.5 Option Relay Unit (FCU8-EX703)
4.14 MITSUBISHI CNC Machine Operation Panel
4.15 Handy Terminal
4.16 Thermistor
5.3.7 MITSUBISHI CNC Machine Operation Panel
7.11.3 Connecting I/O Device via EtherNet/IP
10.10 Connecting with Thermistor (FCU8-DX408)
Chapter 13 Connection of MITSUBISHI CNC Machine Operation Panel
Chapter 14 Connection of Handy Terminal
15.2.2 G071 Cable
15.2.4 G430 Cable
15.2.5 G460 Cable
15.2.14 J121 Cable
22.1.6 Setting the Grid Interval and the Reference Encoder for Grid Interval
Chapter 25 Setting Handy Terminal
- Chapter number change
Due to addition of the chapters as above, the existing chapters were renumbered.
- Chapter title change
Some of chapter titles were changed due to addition of the Remote I/O unit.
- Mistakes were corrected.
Date of
revision
Manual No. Revision details

Mitsubishi M80 series Specifications

General

Type	CNC Control Unit
Power Supply	24V DC
Interpolation	Linear, circular, helical
Fieldbus	CC-Link
Operating Temperature	0 to 45°C
Interface	USB, RS-232
Processor	RISC processor
Ethernet	Yes (100BASE-TX/10BASE-T)