Mitsubishi MELSEC-Q QD77MS User Manual

1 - 25
Chapter 1 Product Outline
The following work is carried out with the processes shown on the previous page.
Details Reference
1)
Understand the product functions and usage methods, the configuration devices
and specifications required for positioning control, and design the system.
•
Chapter 1
•
Chapter 2
•
Chapter 3
•
Chapter 8 to Chapter 14
2)
Install the QD77MS onto the base unit, wire the QD77MS and external connection
devices (servo amplifier, etc.) and wire the PLC CPU and peripheral devices.
•
Chapter 4
3)
Using GX Works2, set the parameter, servo parameters, positioning data, block
start data and condition data required for the positioning control to be executed.
•
Chapter 5
•
Chapter 8 to Chapter 14
•
Simple Motion Module Setting
Tool Help
4) Using GX Works2, create the sequence program required for positioning operation.
•
Chapter 6
•
GX Works2 Version1
Operating Manual (Common)
5)
Write the parameters and positioning data, etc., created with GX Works2 into the
QD77MS.
•
Chapter 7
•
Simple Motion Module Setting
Tool Help
6) Using GX Works2, write the created sequence program into the PLC CPU.
•
Chapter 7
•
GX Works2 Version1
Operating Manual (Common)
7)
Carry out test operation and adjustments in the test function of GX Works2 to
check the connection with the QD77MS and external connection device, and to
confirm that the designated positioning operation is executed correctly. (Debug the
set "parameters" and "positioning data", etc.)
•
Chapter 14
•
Simple Motion Module Setting
Tool Help
8)
Carry out test operation and adjustment to confirm that the designated positioning
operation is executed correctly. (Debug the created sequence program.)
•
GX Works2 Version1
Operating Manual (Common)
9)
Actually operate the positioning operation. At this time, monitor the operation state
as required. If an error or warning occurs, remedy.
•
Chapter 5
•
Chapter 16
•
Simple Motion Module Setting
Tool Help
•
GX Works2 Version1
Operating Manual (Common)
10) Service the QD77MS as required.
•
Chapter 4
11) Dispose of the QD77MS.
•
Chapter 4

Mitsubishi MELSEC-Q QD77MS Specifications

General

Brand	Mitsubishi
Model	MELSEC-Q QD77MS
Category	Control Unit
Language	English