2 - 7
Chapter 2 System Configuration
2.4 How to check the function version and SERIAL No.
The function version and the SERIAL No. of the QD77MS can be checked in the
following methods.
(1) Confirming the serial number on the rating plate
The rating plate is situated on the side face of the QD77MS.
SERIAL No. (The first five digits)
Function version
K CC- RE I - MEK- TC510A796051
DATE: 2011- 12
131210000000000 - B
MITSUBISHI ELECTRIC CORPORATION
MADE I N J APAN
See QD77MS16 Instruction manual .
SERIAL
MELSEC-Q
MITSUBISHI
MODEL
QD77MS16
PASSED
IND. CONT.EQ.80M1
US LISTEDC
SIMPLE MOTION UNIT
24VDC 0.1A 5VDC 0.75A
(2) Checking on the front of the module
The serial No. on the rating plate is also indicated on the front of the module
(lower part).
SERIAL No.
131210000000000- B
QD77MS4
RUN
ERR.
AX1
AX4
AX2
AX3
QD77MS4
AX2
AX1
AX4
AX3