16 - 48
Chapter 16 Troubleshooting
16.5.2 Servo amplifier detection error
The detection error list for servo amplifier is shown below.
Refer to the "Servo amplifier Instruction Manual" for details.
Servo amplifier type Instruction manual name
MR-J4- B SSCNET /H interface MR-J4- B Servo amplifier Instruction Manual (SH-030106)
MR-J4W- B
SSCNET
/H interface Multi-axis AC Servo MR-J4W- B Servo amplifier Instruction
Manual (SH-030105)
MR-J3- B SSCNET interface MR-J3- B Servo amplifier Instruction Manual (SH-030051)
MR-J3W- B
SSCNET
interface 2-axis AC Servo Amplifier MR-J3W- B Servo amplifier
Instruction Manual (SH-030073)
MR-J3- B-RJ004
SSCNET
Compatible Linear Servo MR-J3- B-RJ004 Instruction Manual
(SH-030054)
MR-J3- B-RJ006
SSCNET
Compatible Fully Closed Loop Control MR-J3- B-RJ006 Servo
amplifier Instruction Manual (SH-030056)
MR-J3- BS
SSCNET
interface Drive Safety integrated MR-J3- B Safety Servo amplifier
Instruction Manual (SH-030084)
(1) MR-J4(W)-B
Classification
of errors
Error code
Servo amplifier
LED display
Name Details name Remarks
10.1 Voltage drop in the control power
2010
10.2
Undervoltage
Voltage drop in the main circuit power
11.1 Axis number setting error
2011
11.2
Switch setting error
Disabling control axis setting error
MR-J4W- B use
12.1 RAM error 1
12.2 RAM error 2
12.3 RAM error 3
12.4 RAM error 4
2012
12.5
Memory error 1 (RAM)
RAM error 5
13.1 Clock error 1
2013
13.2
Clock error
Clock error 2
14.1 Control process error 1
14.2 Control process error 2
14.3 Control process error 3
14.4 Control process error 4
14.5 Control process error 5
14.6 Control process error 6
14.7 Control process error 7
14.8 Control process error 8
14.9 Control process error 9
2014
14.A
Control process error
Control process error 10
15.1 EEP-ROM error at power on
Servo
amplifier
errors
2015
15.2
Memory error 2 (EEP-
ROM)
EEP-ROM error during operation
To Next Page
Loading...
Need help?
General
