Setting parameters
10/05 AWB8230-1541GB
132
A078 PID controller – output
signal limit
– j 0.0 – 100 % Percentage limitation of PID control output 0.0
d004 PID feedback display j j – Indication only with active PID control
(PNU A071 = 01).
The display factor is set with PNU A075.
0.00 – 99.99 (0.01 %)
100.0 – 999.9 (0.1 %)
1000 – 9999 (1 %)
–
F001 Reference value, input
through keypad
j j – • Frequency: 0.0 – 400 Hz (0.1 Hz)
• Process variable 0.00 to 9999 % with PID control
enabled (A071 = 01) with display factor (A075).
0.0
PNU Function RUN b031 =
10
Value Function DS
To Next Page
Loading...
