EasyManua.ls Logo

Motorola APX 7000 - Identifying Status Indicators; TMS Menu Options; Call Type Icons

Motorola APX 7000
644 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-30 Theory of Operation: Controller
3.2.1.1 Main Controller Components and Connections
3.2.1.1.1 VOCON Board
The VOCON Board contains the OMAP1710 dual-core processor, FLASH and SDRAM memory,
Audio circuitry (MAKO and CODEC IC's), a Complex Programmable Logic Device (CPLD), the
MACE encryption IC, and interfaces to the other components in the controller design.
Connectors
RF Board – J1001
Expansion Board – J4001
Bluetooth Option Board – J3001
Control Top – J2101
Front Chassis – J2301
3.2.1.1.2 Expansion Board
The expansion board contains the Class D Internal Audio PA with speaker connections, the Global
Positioning System (GPS) circuitry, a removable memory card connector / interface, and connector
interfaces to the GCAI board and side controls flex.
Connectors
VOCON Board – P2001
Side Controls – J2005
GCAI – J2004
3.2.1.1.3 GCAI Connector / Board
The GCAI Connector Board contains the side connector pins, and interfaces to the expansion board
through a flex. The board has this flex connector, along with components for ESD protection.
3.2.1.1.4 Bluetooth Option Board Interface
The Bluetooth Option Board interface is a 60-pin connector contains various interfaces from the
VOCON Board.
3.2.1.2 Top Controls / Flex
The control top contains the top display, the main RF antenna, and five switches: On/Off & Volume
Knob, a 16-position Channel/Frequency Switch with concentric 2-position switch (for secure enable/
disable operation), a 3 position toggle switch for Zone Selection, and a toggle switch used for
Emergency Calling. The control top also includes an TX/RX LED that is solid amber upon receive,
red on PTT, and blinking amber on secure TX/RX.
3.2.1.2.1 Top Display
The Top Display is a FSTN transflective monochrome liquid crystal display (LCD) with a multi-color
backlight (White, Red, Green, and Amber), which connects to the Control Top Flex (see Section
3.2.1.2: "Top Controls / Flex").
3.2.1.2.2 Front Display
The Front Display is a QVGA transflective color LCD, 320 pixels x 240 pixels with a white backlight.
The display connects to the keypad flex.

Table of Contents

Other manuals for Motorola APX 7000

Related product manuals