AT Commands Reference
96 98-08901C68-O
Example
At+cpbs=?
+CPBS: "ME","MT","DC","MC","RC","AD","QD"
OK
At_cpbs? //Read default <storage> after power up
+CPBS: //Before reading SIM
OK
+CPBS: "AD" //After reading SIM
OK
At+cpbs="FD
"+CPBS: "FD"
OK
4.4.1.2 +CPBR, Read Phone Book Entries
This command recalls phone book entries from a specific location number or from a range of locations. If only one location is
specified, and that location is empty, OK is returned. If a range of locations is requested, all locations that contain data within
that range are returned. If a listing fails in a g20 error, +CME ERROR: <err> is returned.
This command can also be used to obtain information about the number of locations and the maximum size of the phone number
and alpha tag fields in the phone book.
This command acts on the currently active phone book, as selected with the +CPBS command (Refer to “+CPBS, Select Phone
Book Memory”, page 94.)
Set Command
The Set command returns phone book entries.
<total> Integer type value indicating the total number of locations
in the selected memory.
Command Response/Action
+CPBR=<index1>[,<index2>] [+CPBR: <index1>,<number>,<type>,<text>
[[...]<CR><LF>
+CPBR: <index2>,<number>,<type>,<text>]]
OK
or:
+CME ERROR: <err>
Table 32. +CPBS Parameters (Continued)
<Parameter> Description
To Next Page
Loading...
