98-08901C68-O 25
Product Features
GPRS
GPRS Commands
+CGCLASS This command sets the GPRS mobile station class. 211
+CGDCONT This command specifies the PDP (Packet Data Protocol) context. 212
+CGQMIN This command sets the minimum acceptable quality of service profile. 216
CGQREC This command returns the requested quality of service profile. 217
+CGACT This command activates/deactivates the PDP Context. 219
+CGATT This command attaches the g20 to the GPRS network. 221
D*99 This command enables the MT to perform the actions necessary for establishing
communication between the terminal and the external PDN.
223
+CGPRS This command indicates whether there is GPRS coverage. 225
NOP Compatible
Ignored (Compatible Only) Commands
%C This command enables/disables data compression. This command is used for
backward compatibility only.
226
&G This command selects the guard tone. This command is used for backward
compatibility only.
226
&L This command enables leased line operation. This command is used for backward
compatibility only.
226
&M This command enables asynch/synch mode connection.This command is used for
backward compatibility only.
226
&P This command selects pulse dialing. This command is used for backward
compatibility only.
226
&R This command selects the CTC controls.This command is used for backward
compatibility only.
226
&S This command defines the DSR behavior. This command is used for backward
compatibility only.
226
&T This command selects tone dialing. This command is used for backward
compatibility only.
226
Table 3. AT Commands (Continued)
AT
Command
Description Page
To Next Page
Loading...
